Undergraduate and graduate programmes offered by the University iuav of Venice:

Antonella Cecchi

 

pubblicazioni

 

tesi di dottorato

 

1. Cecchi A., Tecniche asintotiche di omogeneizzazione per la modellazione meccanica di murature storiche, dottorato in Storia delle Scienze e delle Tecniche Costruttive, IX° ciclo, coordinatore prof. A. Giuffrè, Università di Roma La Sapienza, Roma, Febbraio 1997.

 

 

pubblicazioni su rivista internazionale ISI

 

1. Cecchi A., Di Marco R., (2000), Homogenization of masonry walls with a computationally oriented procedure. Rigid or elastic block?, European Journal of Mechanics A-Solids, 19, pp.535-546.

2. Cecchi A., Rizzi N., (2001), Heterogeneous elastic solids: a mixed homogenization--rigidification technique, International Journal of Solids and Structures, 38/1, pp.29-36.

3. Cecchi A., Di Marco R., (2001), Homogenization of FRP pultruded elements: a computational procedure for designing composite materials, Materials and structures, 34, pp.378-384.

4. Cecchi A., Sab K., (2002), A multi-parameter homogenization study for modeling elastic masonry, European Journal of Mechanics A-Solids, 21, pp. 249 – 268.

5. Cecchi A., Di Marco R., (2002), Homogenized strategy toward constitutive identification of masonry, ASCE Journal of Engineering Mechanics, vol.128 , 6, pp.688-697.

6. Cecchi A., Sab K., (2002), Out of plane model for heterogeneous periodic materials: the case of masonry, European Journal of Mechanics A-Solids, 21, pp. 715-745.

7. Cecchi A., Sab K., (2004), A comparison between a 3D discrete model and two homogenised plate models for periodic elastic brickwork, International Journal of Solids and Structures, vol.41/9-10, pp.2259-2276.+

Cecchi A., Sab K., (2006), Corrigendum to “A comparison between a 3D discrete model and two homogenised plate models for periodic elastic brickwork” (International Journal of Solids and Structures (2004) 41 (2259-2276)), International Journal of Solids and Structures, vol.43, pp.390-392.

8. Cecchi A., Di Marco R., (2004), Glass Fiber Reinforced Polymer pultruded members: constitutive model and stability analysis, ASCE Journal of Engineering Mechanics, vol.130, n.8, pp. 961-970.

9. Cecchi A., Milani G., Tralli A., (2004), In-Plane Loaded CFRP Reinforced Masonry Walls: Mechanical Characteristics by Homogenisation Procedures, Journal of composites science and technology, 64, pp.2097-2112.

10. Cecchi A., Milani G., Tralli A., (2005), Validation of analytical multiparameter homogenisation models for out-of-Plane Loaded Masonry Walls by means of finite element method, ASCE Journal of Engineering Mechanics, vol. 131, n.2, pp. 185-198.

11. Cecchi A., Milani G., Tralli A.. (2005), Out of Plane Loaded CFRP Reinforced Masonry Walls: Mechanical Characteristics by Homogenisation Procedures, Journal of composites science and technology , 65, pp.1480-1500.

12. Cecchi A., Milani G., Tralli A.. (2007), A Reissner–Mindlin limit analysis model for out-of-plane loaded running bond masonry walls , International Journal of Solids and Structures, 44, pp.1438-1460.

13. Cecchi A., Sab K. (2007). A homogenized Reissner-Mindlin model for orthotropic periodic plates. Application to brickwork panels. International Journal Of Solids And Structures. vol. 44, pp. 6055-6079.

14. Cecchi A., Sab K. (2007). Out of plane models for composite brickwork-like materials. Materials Science Forum. vol. 539-543, pp. 2601-2606.[presentato anche a: International Conference on processing & manufacturing of advanced materials, Thermec2006, July 4-8, Vancouver, Canada.]

15. Sab K, Cecchi A., Dallot J. (2007). Determination of overall Yield strain domain of out of plane loaded brick masonry. International Journal Of Multiscale Computational Engineering. vol. 5/2, pp. 83-92.

16. Cecchi A., Milani G. (2008). A kinematic limit analysis model for thick English bond masonry walls. International journal of solids and structures. vol. 45, pp. 1302-1311.

17. Cecchi A., Sab K. (2009). Discrete and continuous models for in plane loaded random elastic brickwork. European Journal of Mechanics A-Solids, 28, pp.610-625.

18. Cecchi A., Sab K. A Homogenized Love-Kirchhoff Model for Out-of-Plane Loaded Random 2D lattices. Application to Brickwork Panels. In stampa su International journal of solids and structures.

 

 

pubblicazioni su altre riviste internazionali

 

19. Siviero E., Cecchi A., (febb. 1994), Form and structure in bridge design, in Structural Engineering International, n.1.

20. Cecchi A., (2006), CFRP Reinforced Masonry Walls: analytical and numerical homogenised models, WSEAS transactions on Applied and Theoretical Mechanics, Issue 1, vol.1, pp 7-15. [presentato anche al Proc: WSEAS International conferences: 2nd WSEAS Int. Conf. on Applied and Theoretical Mechanics, editors: Nikos Mastorakis, Antonella Cecchi, Nov. 20-22, Venezia.]

21. Barbieri A, Cecchi A. (2007). Analysis of Masonry Columns by a 3D F.E.M. Homogenisation Procedure. WSEAS Transactions On Applied And Theoretical Mechanics. vol. 2, pp. 42-51.

22. Cecchi A., Barbieri A. (2008). Homogenisation procedure to evaluate the effectiveness of masonry strengthening by CFRP repointing techinque. WSEAS Transactions On Applied And Theoretical Mechanics. issue 1, vol 3, pp. 12-27. [presentato anche a: Proc: WSEAS International conferences: 2nd WSEAS Int. Conf. on Applied and Theoretical Mechanics, May 15-17, Portoroz Slovenia.

 

 

pubblicazioni su rivista nazionale

 

1. Siviero E., Cecchi A., (1993), Riflessioni sull’attuale conoscenza delle caratteristiche meccaniche del calcestruzzo, in Quarry & Construction, n.2, pp.19-25.

2. Siviero E., Cecchi A., (1993), Methodologic research for the design of bridges and viaducts, in Italian Building and Construction, n. 53, pp.57-63.

3. Siviero E., Cecchi A., (1994), Riflessioni sull’attuale conoscenza delle caratteristiche meccaniche degli acciai da cemento armato, in Quarry & Construction, n.2, pp.90-96.

4. Siviero E., Cecchi A., (1994), Comportamento non lineare delle membrature in cemento armato, in Quarry & Construction, n.12, pp.103-108.

 

 

atti di convegni internazionali

 

1. Siviero E., Cecchi A., (1994), Non linearité du comportement des éléments en béton armé, in Nouveax aspects du dimensionnement des structures en béton, documentation SIAD 0700, école polytechnique fédéral de Lausanna, 1 dic., pp.25-32.

2. Siviero E., Cecchi A., (1995), A comment om 18th-century studies attempting to explain the statics of arches and domes, in Spatial structures: Heritage, present and future, Proc: IASS international symposium, Milano 5-9 june, edited by G.C.Giuliani.

3. Barbieri A., Cecchi A., Di Tommaso A., (2000), Structural identification to analyse stonework columns bearing capacity: the case of Santa Fosca at Torcello (Venice), Proceding of 5th International symposium on the conservation of Monuments in the Mediterranean Basin (Seville), april, pp.467-474.

4. Cecchi A., Saetta A., Maccarini R., (2001), Micromechanical approach to masonry: discrete finite element model and continuum homogenised model. Proc: ECCM 2001, Cracowa, June 26-29.

5. Cecchi A., Milani G., Tralli A., (2002), ‘A plate asymptotic model for unreinforced and FRP reinforced masonry walls’, Proc: GIMC 2002, Third joint conference of Itralian group of computational mechanic and Ibero-Latin American association of computational methods in Engineering, Giulianova (TE), Italy.

6. Cecchi A., (2002), Sensitivity elastic analysis to various parameters of unreinforced and FRP reinforced masonry walls, Proc: “Workshop on optimal design” Laboratoire de Mécanique des Solides-Ecole Polytechnique Palaiseau, 25-27 novembre

7. Cecchi A., Milani G., Tralli A., (2003), 3D Asymptotic Model For Cfrp Reinforced Masonry Walls, Proc: 1st CEACM* Conference on Computational Mechanics- 15thInternational conference on computer methods in mechanics CMM-2003 june 3-6, Gliwice/Wisla, Poland.

8. A. Barbieri, A. Cecchi, A. Tommaso, (2006), 3D Homogenization Procedure for Load Bearing Masonry Columns, Proc: III European Conference on Computational Mechanics: Solids, Structures and Coupled Problems in Engineering, June 5-8, Lisbon, Portugal.

9. A. Cecchi, (2006), Plate Micromechanical Models for 3D Periodic Brickworks, , Proc: III European Conference on Computational Mechanics: Solids, Structures and Coupled Problems in Engineering, June 5-8, Lisbon, Portugal.

10. Cecchi A., Milani G., Tralli A., (2006), Limit Analysis of Out-Of-Plane Loaded Running Bond Masonry Walls Under Mindlin-Reissner Plate Hypotheses, Proc: III European Conference on Computational Mechanics: Solids, Structures and Coupled Problems in Engineering, June 5-8, Lisbon, Portugal.

11. Cecchi A., Rizzi N.L., Varano V., (2006), A homogenization procedure for arched and vaulted masonry structures, Proc: International Conference on processing & manufacturing of advanced materials, Thermec, July 4-8, Vancouver, Canada.

12. Barbieri A, Cecchi A. (2007). 2D homogenisation procedure in masonry walls strenghtened by FRP repointing technique. In: 3rd WSEAS International Conference on Applied and Theoretical Mechanics(MECHANICS'07). Puerto la Cruz, Tenerife. 14-16 dicembre. (SPAIN).

 

 

atti di convegni nazionali

 

1. Siviero E., Rebonato L., Cecchi A., (1994), Il ponte di Battaglia Terme: attualità di un progetto ad arco in c.a., Proc: C.T.E., Milano 3-4-5 novembre.

2. Cecchi A., Rizzi N., (1996), Tecniche di omogeneizzazione per l’analisi delle murature, in La meccanica delle murature tra teoria e progetto, atti del convegno, Messina 18-20 sett., pp.317-326.

3. Cecchi A., Milani G., Tralli A., (2003), Un modello per murature rinforzate con FRP: analisi del comportamento meccanico e sensitivita’ di pannelli murari al variare del posizionamento del rinforzo, Proc.: XVI congresso AIMETA di meccanica teorica e applicata, Ferrara 9-12 settembre.

4. Cecchi A., Rizzi N.L., (2003), Analisi in piu’ parametri perturbativi per murature a struttura regolare: identificazione 3D con modelli 2D di piastra, Proc: XVI congresso AIMETA di meccanica teorica e applicata, Ferrara 9-12 settembre.

5. Cecchi A., Milani G., Tralli A., (2004), Equilibrio limite di pannelli murari rinforzati in FRP soggetti ad azioni nel piano, 2° convegno nazionale, Proc: “Meccanica delle strutture in muratura rinforzate con FRP materials: modellazione, sperimentazione, progetto, controllo, Venezia 6-8 dicembre, pp.171-182.

6. Cecchi A., Zerbo V., (2004), Analisi di stabilità di travi metalliche rinforzate con FRP materials, 2° convegno nazionale , Proc: “Meccanica delle strutture in muratura rinforzate con FRP materials: modellazione, sperimentazione, progetto, controllo, Venezia 6-8 dicembre, pp.399-410.

7. Cecchi A., Rizzi N.L., (2005), Modelli 2D con microstruttura per pannelli di muratura in 3D, Proc: XVII congresso AIMETA di meccanica teorica e applicata, Firenze, 11-15 settembre.

8. Cecchi A., Milani G. (2007). A homogenization kinematic FE model for two-wythes English bond masonry walls. XVIII Congresso Aimeta di Meccanica Teorica e Applicata. 11-14 settembre. (pp. 567-568).

 

 

capitoli di testi

 

1. Siviero E., Cecchi A., (1992), Ricerca metodologica per la progettazione di ponti e viadotti, in Architettura e Strutture, Costruzioni oggi e domani, CEV, Padova, sett., pp.75-89.

2. Siviero E., Cecchi A., (1994), Un ponte ad arco di moderna concezione, in Architettura e Struttura, Il ponte e l’architettura, n.5, a cura di Siviero E., Casucci S., Cecchi A., CEV, Padova dic., pp.177-189.

3. Siviero E., Cecchi A., (1995), La continuità nel sistema strutturale del ponte, in Il ponte e l’architettura, a cura di Siviero E., Casucci S., Cecchi A., Città studi ed., Milano, genn., pp.319-337.

4. Cecchi A., Ceccotti A., (2002), Caratterizzazione meccanica di elementi murari storici per lo studio del palazzo di Diocleziano a Spalato, AR- Argomenti di Restauro della Facoltà di Architettura del Politecnico di Bari, 2, pp.73-82.

5. Cecchi A., (2002), Procedura numerica per l’omogeneizzazione dell’opera muraria: modello 2D, AR- Argomenti di Restauro della Facoltà di Architettura del Politecnico di Bari, 2, pp.83-96.

 

 

presentazioni a congressi con sommari estesi

 

a. Cecchi A., Rizzi N., (1997), Rigid inclusion in an elastic matrix: a 2D model for masonry walls, presentato al III EUROMECH Solid Mechanics Conference, Stoccolma 18-22 agosto, p.196.

b. Milani E., Milani G., Cecchi A., Tralli A., (2007), FE limit analysis strategies for the analysis of masonry structures in- and out-of-plane loaded, 9th US National Conference on Computational Mechanics, San Francisco (CA) July 23-26.

c. Cecchi A., Rizzi N.L., Varano V., (2007) Continuum models for out of plane behaviour of masonry panels, 9th US National Conference on Computational Mechanics, San Francisco (CA) July 23-26.

d. Berto L, Cecchi A., Saetta A. (2008). Sensitivity of mechanical masonry characteristics to the textures: FE micro-modelling and homogenization procedures. IACM-ECCOMAS 2008 Congress. Venezia. 30 giugno-4 luglio.

e. Cecchi A., (2008). Continuous and discrete models for periodic and not periodic masonry, giornata Scientifica –Sviluppi scientifici relativi ai problemi riguardanti gli edifici storici, Laboratorio Lagrange, Vaulx en Velin, France, 7 novembre.

 

 

 

<< torna alla pagina del docente